Honeywell Voyager 1202g Wireless Scanner

₨45500.00

  • Wireless Bluetooth 1D laser scanner with charging base — scan up to 10 m from the till
  • Wireless with charging base — battery version gives up to 45,000 scans per charge
  • Fast single-line laser at 100 scans per second for checkout and stock counts
  • 3-year factory warranty; survives 30 drops from 1.5 m with IP42 sealing

Description

Overview

Ever tried scanning stock at the far end of your shop with a corded scanner? You can’t. The cable gives up after a metre or so, and you’re stuck dragging the carton back to the counter. That’s the headache the Honeywell Voyager 1202g is built to fix. It’s a wireless, single-line laser scanner — no cord on the scanner itself, just a small charging base by your computer that talks to it over USB. Pick it up and scan where the goods are.

In the box you get the scanner, the charge and communication base, and a USB cable. The battery version carries an 1800 mAh lithium-ion battery — more on the battery-free twin below. The scanner talks to its base over Bluetooth 2.1, and the base plugs into your computer. It reads standard 1D barcodes and GS1 DataBar codes at 100 scan lines a second. What it won’t do is QR codes. If your stock runs on QR, this isn’t your scanner.

Key Benefits

You can move. That’s the big one. The scanner works up to 10 metres from its base in line of sight, and Honeywell has shown 30 metres with a clear line of sight. In a warehouse that means scanning pallets where they sit. In a shop it means doing your stock count in the aisles. No cable to snag on a shelf edge, either.

Then there’s the battery — with one honest caveat. The battery version carries an 1800 mAh lithium-ion battery, and Honeywell rates that version at 12 hours or more and up to 45,000 scans on a single charge. A full charge takes 4 hours, and the battery pops out without tools. But the battery-free twin, the 1202g-BF, looks exactly the same, charges in seconds off a supercapacitor, and only holds at least 100 scans per charge.

It reads rough codes fast, too. A single-line laser at 100 scans a second, and it’ll take codes that aren’t perfect — faded print, a smudge, a label stuck on at an angle. It only needs 10% minimum print contrast, so rough carton labels don’t slow it down.

And it’s built on the corded Voyager 1200g, a scanner half the shops in Pakistan already know. Same engine, just without the cable. The base works over USB, Keyboard Wedge, RS-232 or IBM 46xx, and picks the right interface on its own. Lose the scanner down the back of a shelf? Press the button on the base and it beeps and blinks until you find it.

Honeywell Voyager 1202g Scanner right side view

Features and Advantages

Here’s what the numbers mean in practice. The laser runs at 645 to 660 nm, one line, 100 lines a second, across a 30-degree horizontal scan angle, with 60 degrees of pitch and 60 of skew. Depth of field: a 13 mil UPC-A reads from contact out to 311 mm, a 20 mil Code 39 out to 367 mm, a 10.4 mil Code 39 from contact to 277 mm, and a small 5 mil Code 39 between 27 and 151 mm.

The wireless side is Bluetooth v2.1 with enhanced data rate — Class 2, 2.4 to 2.5 GHz, adaptive frequency hopping, up to 3 Mbps. The base, the CCB00-010BT, is a low cradle, 200 x 67 x 97 mm and 185 g, that charges the scanner by contact whenever it’s docked.

It’s light to hold — 180 x 66 x 92 mm and 180 g with the battery in — but it isn’t delicate. It’s rated for 30 drops from 1.5 metres onto concrete, sealed to IP42, and works from 5 to 40 degrees and in light up to 70,000 lux. It comes in black.

Honeywell Voyager 1202g Scanner top view

Ideal Users

Who’s this actually for? Warehouses and stock rooms first. If your staff spend their day counting stock, receiving goods or picking orders, they need a scanner that moves with them — and 10 metres of Bluetooth plus a battery that, in the battery version, is rated for a full shift makes that work. The drop rating covers falls from racking and benches.

Retail shops are the other natural fit. Big floor area? Use it for stock counts in the aisles, for scanning bulky items where they stand, and for receiving in the back room. If your shop already runs the corded Voyager 1200g, this is a familiar upgrade. Just don’t buy it for QR codes. It’s 1D only. For QR, look at a 2D scanner like the Voyager 1470g instead.

Technical Specifications

Specification Details
Model Honeywell Voyager 1202g (USB kit)
Scan engine Single-line laser, 645–660 nm
Scan speed 100 scan lines per second
Scan angle Horizontal 30°; pitch 60°, skew 60°
Symbologies Standard 1D + GS1 DataBar
Depth of field 5 mil Code 39 27–151 mm; 7.5 mil Code 39 16–216 mm; 10.4 mil Code 39 0–277 mm; 13 mil UPC-A 0–311 mm; 20 mil Code 39 0–367 mm
Print contrast 10% minimum reflectance difference
Wireless Bluetooth v2.1 +EDR, Class 2, 2.4–2.5 GHz, adaptive frequency hopping, 10 m line of sight (up to 30 m clear), up to 3 Mbps
Battery (battery version) 1800 mAh Li-ion, field-replaceable; 12+ hours; up to 45,000 scans per charge; charge time 4 hours
Base CCB00-010BT charge & communication base, 200 x 67 x 97 mm, 185 g
Host interfaces USB, Keyboard Wedge, RS-232, IBM 46xx (RS485) via base
Dimensions 180 x 66 x 92 mm
Weight 180 g (including battery)
Drop resistance 30 drops from 1.5 m to concrete
Sealing IP42
Operating temperature 5–40 °C (charging 5–40 °C)
Light levels 0–70,000 lux
Colour Black
Warranty 3-year factory warranty
In the box Scanner + battery + base + USB cable (1202G-2USB-5 kit)

FAQs

Is this the battery version or the battery-free version? The standard battery version carries an 1800 mAh lithium-ion battery giving 12 or more hours and up to 45,000 scans per charge. The battery-free (BF) version uses a supercapacitor instead and holds far fewer scans. Please confirm the stocked unit’s version from the box before ordering.

Does the Voyager 1202g read QR codes? No — though a few online ads for this model wrongly claim it does. It’s a 1D single-line laser scanner: standard 1D barcodes and GS1 DataBar only. No QR, no Data Matrix, no PDF417. If you need QR reading, pick a 2D scanner such as the Voyager 1470g.

How far from the base can I scan? Up to 10 metres in line of sight over Bluetooth, and up to 30 metres with a clear line of sight.

How long does the battery last? If your unit is the battery version, Honeywell rates it at 12 hours or more and up to 45,000 scans on a single charge, with a full charge taking 4 hours.

Why Buy From NexGenShop.pk?

You’ll see this scanner listed in a lot of places, and not all of them are careful about which Voyager they’re actually selling. The corded 1200g looks the same. The battery-free 1202g-BF looks the same. We list the model number, the full specification table and the price — Rs 45,500, no hidden charges. For context, a Karachi-based seller lists it at Rs 44,690, out of stock. You can also follow us on Facebook at https://www.facebook.com/nexgenshop.pk and on Instagram at https://www.instagram.com/nexgenshoppk for new arrivals and offers.

Final Conclusion

So, is it worth Rs 45,500? If your stock runs on 1D barcodes and your staff need to scan away from the counter, yes. You get 10 metres of Bluetooth freedom, a laser that reads rough labels at 100 lines a second, and a tough little scanner — plus, if yours is the battery version, a battery Honeywell rates at 12 hours or more and up to 45,000 scans a charge. Confirm the battery version on the box, then order the Honeywell Voyager 1202g Wireless Scanner from NexGenShop.pk today.

Reviews

There are no reviews yet.


Be the first to review “Honeywell Voyager 1202g Wireless Scanner”