Honeywell HH490 2D Barcode Scanner

₨4999.00

  • 2D area imager with a 1280 × 800 pixel array reads 1D, PDF, 2D and DotCode symbols, including QR codes on screens and labels.
  • Corded USB and RS-232 connection with no battery to charge — plug it in and it is ready for the next shift.
  • Reads damaged, faded and poorly printed barcodes at up to 75 cm/s motion tolerance, with a 1.2 m drop rating and IP40 sealing.
  • Lightweight 130 g handheld with Honeywell EZConfig software and a 3-year factory warranty.

Description

Overview

Picture your counter at rush hour. A queue’s building, a customer’s holding up their phone to pay, and the barcode on the next box is half rubbed off. The Honeywell HH490 is a handheld 2D barcode scanner for shops, pharmacies and warehouses that want a dependable counter scanner. Its 2D area imager has a 1280 × 800 pixel array and a 1 GHz processor, so it reads QR codes and Data Matrix codes off a phone screen or a printed label — not just 1D barcodes.

It’s corded, plain and simple. Plug it in over USB or RS-232 and it draws power from the same cable. No battery, no Bluetooth pairing. At 130 g it’s light in the hand, it’s rated for 1.2 m drops onto concrete, and it’s sealed to IP40 against dust. Two things to clear up: this isn’t a Xenon — Honeywell’s Xenon line is the 1900 and 1950 series — and there’s no wireless HH490. The wireless one in this family is the HH492, a different scanner.

Key Benefits

Start with what it reads, because that’s what matters at the till. A 1D laser scanner stops at ordinary barcodes. The HH490 reads those too, plus PDF417, QR and Data Matrix codes, and DotCode. How many of your customers pay by QR code or show a loyalty code on their phone now? One device covers the till, the phone and the shelf label.

Then there’s the speed. It keeps up with motion of up to 75 cm/s on a 13 mil UPC code at optimal focus — no need to hold every item dead still. The scan angles are forgiving: 48° horizontal and 30° vertical, with roll of ±180°, pitch of ±60° and skew of ±65°.

Poor print? It copes better than most scanners in this class. It reads down to 25% minimum print contrast, and its decode ranges cover the small, dense codes that trip up cheaper imagers. A 5 mil Code 39 reads from 40 to 225 mm, a 6.7 mil PDF417 from 50 to 210 mm, and a 10 mil Data Matrix from 45 to 185 mm.

And the running cost is low. No battery to replace, no charging cradle to buy, no wireless receiver to lose behind the counter. Power comes over the USB cable at 5 V, drawing 2 W while scanning. Honeywell backs it with a 3-year factory warranty.

Honeywell HH490 2D barcode scanner top angle view

Features and Advantages

At the heart of the HH490 is a 1-megapixel global-shutter camera. A global shutter grabs the whole image in one go instead of line by line. That’s why it can read a code on a moving item, or a code glowing on a bright phone screen. The 1 GHz processor decodes fast, and the 1280 × 800 array has enough resolution to pick out small, dense codes a lower-resolution imager would miss.

It’s built for the daily knocks, too. It’s rated for 1.2 m drops to concrete twice over, plus 250 tumbles of half a metre, and the IP40 seal keeps dust out of the optics. It works with Honeywell’s EZConfig software, supports OPOS and JPOS drivers, POSNET4 and the Scanner Management Utility — and as a standard USB HID keyboard it just types the scanned code wherever your cursor is — no driver install, no fuss. Pakistani sellers list it working with Candela, Oscar POS, Retail Pro and FBR Tier-1/Tier-2 POS software. The box includes the scanner and a USB cable; a stand is available separately. It also takes the older HH400’s accessories.

Honeywell HH490 2D barcode scanner top view with cable

Ideal Users

Who’s this really for? Any retail counter where 2D codes are part of the daily routine. A grocery store or mini-mart gets the most out of it — one device for product barcodes, QR payment codes and loyalty codes. If a customer pays with EasyPaisa or JazzCash, the scanner reads the payment QR straight off their phone screen. Pharmacies are another natural fit. Medicine boxes carry small, dense 2D codes, and the HH490’s resolution and short decode ranges handle them well, while its ability to read faded print helps with older stock. Honeywell lists the same uses — membership ID, mall payments, hotel check-in, hospitals and schools. Because it’s corded, it belongs at a fixed point. A till or a packing bench — not for walking the aisles.

Technical Specifications

Specification Details
Brand / Model Honeywell HH490
Scan engine 2D area imager, 1280 × 800 pixel array (1 MPx global shutter camera), 1 GHz MCU
Decode capability Standard 1D, PDF, 2D and DotCode
Motion tolerance Up to 75 cm/s for 13 mil UPC at optimal focus
Scan angle Horizontal 48° nominal; Vertical 30° nominal; Roll ±180°, Pitch ±60°, Skew ±65°
Minimum print contrast 25%
Decode ranges 5 mil Code 39: 40–225 mm; 6.7 mil PDF417: 50–210 mm; 10 mil Data Matrix: 45–185 mm
Interfaces USB, RS-232 (corded; no wireless, no battery)
Dimensions / Weight 72.5 × 125 × 154 mm; 130 g
Power 5 ± 0.5 VDC; operating 2 W; standby 0.55 W
Drop / Tumble 1.2 m drops to concrete (2 times); 250 × 0.5 m tumbles
Sealing / Light IP40; 0 to 100,000 lux
Temperature / Humidity Operating 0–50 °C; storage −40 to 60 °C; humidity 0–95% non-condensing
Software EZConfig, OPOS/JPOS drivers, POSNET4, SMU
Accessories / Box HH400 accessories fit; box includes scanner and USB cable
Warranty 3-year factory warranty

FAQs

Is the HH490 a Xenon scanner? No. Honeywell’s Xenon line is the 1900 and 1950 series — bigger, premium handhelds. The HH490 is Honeywell’s own budget Gen-7 platform, built around a 1-megapixel camera and a 1 GHz processor.

Does the HH490 read QR codes? Yes. It reads 2D codes including QR codes and Data Matrix, plus standard 1D barcodes, PDF417 and DotCode — printed labels and phone screens alike.

Is the HH490 wireless? No. It’s corded only, connecting by USB or RS-232 and taking its power from the cable. If you need wireless, look at the HH492 — same family, different scanner.

Can it read damaged or faded barcodes? Better than you’d expect. It reads down to 25% minimum print contrast, and the 1-megapixel imager handles small and poorly printed codes well. But a code that’s truly wrecked will still fail, same as on any scanner.

What warranty does it carry? Honeywell gives a 3-year factory warranty on the HH490. That’s Honeywell’s own term; local distributor cover is separate.

Why Buy From NexGenShop.pk?

Barcode scanners in Pakistan have plenty of look-alikes, and a model number on a box doesn’t always mean what you think. The HH490 you get from NexGenShop.pk is the real corded 2D scanner described on this page — not a wireless variant passed off as this model, not a refurbished unit. Every listing on the store is written from the manufacturer’s own datasheet, so the specs you read are the specs you get.

Order online, pay the way that suits you, and the scanner is packed and dispatched with care. Stuck choosing between scanners? The NexGenShop.pk team can advise before you buy. Follow the store on Facebook and Instagram for new stock and offers. The store also carries the HP ScanJet Pro 3000 s4, the HP LaserJet MFP M136w and the HP LaserJet Pro 3003dn.

Final Conclusion

Is the HH490 right for your counter? If you need one reliable corded 2D scanner at a fixed till point, yes. It reads 1D and 2D codes, including QR codes off phones. It plugs in and works — no batteries, no pairing. It survives daily knocks, with a 3-year factory warranty behind it. It’s not a premium Xenon handheld, and it’s not wireless. For a hard-working shop-counter scanner, it does the job well.

Reviews

There are no reviews yet.


Be the first to review “Honeywell HH490 2D Barcode Scanner”