







Honeywell Xenon Ultra 1960G Scanner
₨48500.00
- Premium 2D area imager with a 1280 x 1080 sensor and green-dot LED aimer
- Reads 1D, 2D, QR, PDF417 and Data Matrix, including damaged and low-contrast codes
- Wired USB connection with keyboard wedge and RS-232 support, no battery to charge
- IP52 sealed, survives 50 drops from 1.8 m, with a 5-year factory warranty
- Description
- Reviews (0)
Description
Overview
Here’s the short version. The Xenon Ultra 1960G is Honeywell’s top handheld scanner, and it’s wired. Plug it in, pull the trigger, and it reads the code — 1D barcodes, QR codes, PDF417, Data Matrix, the lot. No battery, no Bluetooth pairing, nothing to charge at the end of the day.
Look at the front and you’ll spot what sets it apart from the older Xenon models. The 1950 family throws a red bar across the code; this one puts a small green dot on it instead. That dot shows up on dark boxes and in bright shop light, where a red bar washes out. Behind it sits a bigger sensor — 1280 x 1080 pixels, against 1280 x 800 on the 1950.
It also reads poorer-quality codes. Faded till receipts, smudged labels, low-contrast printing — the 1960G handles print contrast down to 15%, where the older models needed 20%. It picks up a 3 mil Code 39, a 13 mil UPC out to 654 mm, a 20 mil QR out to 495 mm. At 147.2 g it’s light, sealed to IP52, rated for 50 drops from 1.8 m and 2,000 tumbles, with Honeywell’s 5-year factory warranty.
Key Benefits
Start with the codes other scanners give up on. A rained-on label, a carton dragged across a warehouse floor, a medicine strip with tiny print — the stuff that makes a cheap scanner beep and fail. The bigger sensor and 15% contrast floor mean most of those still read on the first pull.
Then there’s the green dot. Sounds small, doesn’t it? It isn’t. Six barcodes crowded on one carton? The dot tells you exactly which one you’re about to scan, before you pull the trigger. Fewer wrong scans, fewer wrong items, fewer returns.
Speed matters at a busy counter, and this one doesn’t make you wait. It reads codes on the move, so a picker walking past a shelf or a cashier sliding items across can keep going. The view is wide too — 42 degrees across, 36 up and down — so the code doesn’t have to sit dead centre.
And it’ll take the knocks. Concrete floors, dusty godowns, a scanner dropped for the third time in a day — IP52 sealing, 50 drops from 1.8 m, 2,000 tumbles, five years of warranty. That’s what matters when you’re buying one scanner instead of replacing a cheap one every year.

Features and Advantages
Under the hood it’s an area imager — it takes a picture of the code and decodes it, instead of sweeping a line across it. White 2700 K light, the green-dot aimer and that 1280 x 1080 sensor work together, reading from total darkness up to 100,000 lux. Dim storeroom, sunlit dock, same result. It decodes 1D, 2D, postal, DotCode, Digimarc and OCR codes.
Reach is generous. A 13 mil UPC reads from touching the window out to 654 mm, and a 20 mil QR reads from 0 to 495 mm. Angles are forgiving too — roll 360 degrees, pitch and skew 65 either way. No twisting your wrist to get a read.
Hooking it up is the easy part. USB, keyboard wedge or RS-232 — plug it in and it types the code straight into your software. It draws 2.5 W and works from 0 to 50 degrees C. A beeper and good-decode LEDs confirm each read. The box holds the scanner and a USB cable; a stand is optional, not included. Upgrading? Honeywell’s own datasheet says you can keep the cable from your existing Xenon XP 1950g setup and use it on the 1960G. No rewiring the counter.

Ideal Users
Warehouses first. Picking, packing, goods-in, dispatch — every step runs on scanning, and half the labels are creased, faded or printed on awkward surfaces. That’s the work this scanner is built for.
Busy retailers next — supermarkets, electronics shops, pharmacies, anywhere the counter never really stops. Small codes on cosmetics and medicine strips, QR codes on phone screens. The green dot earns its keep here.
Parts stores and small factories too. Data Matrix codes stamped on components, serial labels on equipment, dense little codes that stop a budget scanner cold — the 3 mil reading and 15% contrast floor handle those. Honest word, though: if your shop only scans plain 1D barcodes a few dozen times a day, this is more scanner than you need. A basic 1D laser would do that job for less.
Technical Specifications
| Specification | Details |
|---|---|
| Model | Honeywell Xenon Ultra 1960G Scanner |
| Scan engine | Area imager, 1280 x 1080 pixel array |
| Aimer | Green-dot LED aimer, 525 nm; white 2700 K illumination |
| Symbologies | 1D, PDF, 2D, Postal, DotCode, Digimarc, OCR |
| Motion tolerance | 4 m/s for 13 mil UPC at optimal focus |
| Scan angles | Roll plus/minus 360 degrees, pitch plus/minus 65 degrees, skew plus/minus 65 degrees |
| Field of view | Horizontal 42 degrees, vertical 36 degrees |
| Minimum print contrast | 15 percent reflectance difference |
| Light levels | 0 to 100,000 lux |
| Depth of field (13 mil UPC) | 0 to 654 mm |
| Depth of field (20 mil QR) | 0 to 495 mm |
| Depth of field (3 mil Code 39) | 34 to 174 mm |
| Interfaces | USB, Keyboard Wedge, RS-232 |
| Input voltage | 4.4 to 5.5 V DC |
| Operating power | 2.5 W (500 mA at 5 V DC) |
| Dimensions | 108.2 x 70.4 x 160.2 mm |
| Weight | 147.2 g |
| Sealing | IP52 |
| Drop resistance | 50 drops at 1.8 m to concrete across operating temperature range |
| Tumble resistance | 2,000 tumbles at 0.5 m |
| Operating temperature | 0 to 50 degrees C |
| Warranty | 5-year factory warranty (corded 1960G) |
FAQs
How is the Xenon Ultra 1960G different from the Xenon XP 1950G? The 1960G is the newer model. Bigger sensor — 1280 x 1080 against 1280 x 800 — a green-dot aimer instead of the 1950’s red bar, and it reads codes down to 15% contrast instead of 20%, plus 3 mil Code 39. The two look alike, so check for the green dot and the Xenon Ultra marking.
Does it read QR codes? Yes — QR, Data Matrix and PDF417, plus standard 1D barcodes and OCR fonts.
Is this scanner wireless? No, this one’s wired. The cordless version is the Xenon Ultra 1962G — a different model, with a battery and a charge base. Don’t mix them up when ordering.
What does the green-dot aimer do? It puts a bright green dot on the exact barcode about to be read — handy when a carton has several codes close together, and easy to see on dark packaging or in bright light.
What warranty does it carry? Five years, factory warranty, on this corded 1960G. The cordless 1962G only carries three years — different model, different warranty.
Why Buy From NexGenShop.pk?
This page is for one exact model: the Honeywell Xenon Ultra 1960G, wired, with the green-dot aimer. Not the older Xenon XP 1950G, not the cordless 1962G. The specs, price and kit here match what you’ll get — and this isn’t some rare import you’ll never see locally. The same wired model is already on the shelves at POS equipment shops in Karachi. Complete your setup here: the HP ScanJet Enterprise Flow 5000 s5 handles high-volume document scanning and the HP LaserJet Pro M501dn covers daily printing. Follow NexGenShop.pk on Facebook and Instagram for new stock and offers.
Final Conclusion
So, who should buy it? Anyone whose day depends on scanning — a warehouse, a busy shop, a parts store. Missed reads cost time and money. This scanner misses very few. It reads damaged, faded and tiny codes, the green dot shows you what’s about to be scanned, and it takes the drops and dust of real work. At Rs 48,500, it’s not the cheapest scanner on the shelf, and it’s not trying to be. It’s the one you buy once and stop thinking about.










Reviews
There are no reviews yet.